Início
por Biostar LGA-1155 Socket Motherboards Based on 6-Series Chipsets Spotted
Intel's upcoming Sandy Bridge processor architecture which uses the new LGA-1155 socket seems to be closer than one would think, with motherboard vendors such as Biostar being ready with motherboards that run those processors. The motherboard vendor showed off two socket LGA-1155 motherboards that are based on the Intel P67 and H67 chipsets. The P67 is engineered to be the chipset for processors that need discrete graphics, the chipset lacks the Intel FDI technology needed to connect the processors' embedded graphics controller to display outputs on the motherboard, whereas the H67 does, and is designed for processors with embedded graphics.
The first spot is the TP67XE, based on the P67. This ATX motherboard has all the features of a mid-range performance board. The processor is powered by a 4+2 phase VRM, it is wired to four DDR3 DIMM slots for dual-channel memory. It is said that the Sandy Bridge processors will have higher reference DRAM speeds than present Nehalem/Westmere chips (which have DDR3-1066 and DDR3-1333 depending on the model), expansion slots include one PCI-Express x16, one PCI-E x16 (electrical x4), two PCI-E x1, and two PCI. While the board has padding for a 2-port 3rd party USB 3.0 controller, it is indicated that Intel 6-series chipsets will finally introduce native SATA 6 Gb/s.
Intel's upcoming Sandy Bridge processor architecture which uses the new LGA-1155 socket seems to be closer than one would think, with motherboard vendors such as Biostar being ready with motherboards that run those processors. The motherboard vendor showed off two socket LGA-1155 motherboards that are based on the Intel P67 and H67 chipsets. The P67 is engineered to be the chipset for processors that need discrete graphics, the chipset lacks the Intel FDI technology needed to connect the processors' embedded graphics controller to display outputs on the motherboard, whereas the H67 does, and is designed for processors with embedded graphics.
The first spot is the TP67XE, based on the P67. This ATX motherboard has all the features of a mid-range performance board. The processor is powered by a 4+2 phase VRM, it is wired to four DDR3 DIMM slots for dual-channel memory. It is said that the Sandy Bridge processors will have higher reference DRAM speeds than present Nehalem/Westmere chips (which have DDR3-1066 and DDR3-1333 depending on the model), expansion slots include one PCI-Express x16, one PCI-E x16 (electrical x4), two PCI-E x1, and two PCI. While the board has padding for a 2-port 3rd party USB 3.0 controller, it is indicated that Intel 6-series chipsets will finally introduce native SATA 6 Gb/s.
